900MHz Spread Spectrum MARQUIS™ is a full 900MHz Spread Spectrum wireless
system that will provide years of reliable, maintenance free service.
up to 10 fully programmable zones
- all zones programmable
- all zones supervised for low battery, tamper, device fault, open & close
- any zone may be converted to a keyswitch for arming/disarming the system
12 programmable access codes :
- 1 installer access code, 1 downloading computer access code
- 10 user codes including 1 master user code
- 1 of the user codes may be programmed as a 'one-time use' code
open/close and partial close reporting by access code
quick-exit…
- allows users to exit an armed system easily
'home' mode
- provides security of perimeter arming while premise is occupied
auto-interior bypass
- when turned on…automatically bypasses interior zones if no
exit is detected after arming
door chime
- when turned on…causes sounder to beep when a delay or
instant zone is activated (adjustable volume levels)
individual reporting of zone alarms, tamper alarms,
low battery, AC failure, device fault (supervisory)
and restorals
3 audible options : steady, pulsed, silent
- selectable Hi/Med/Low volume setting
8 programmable zone types:
- delay 1, delay 2, instant, interior, 24 hour, 24 hour
medium buzzer, key switch arm, fire, and panic
22 programmable system options including:
- quick exit, auto interior, door chime, one-time use code, pre-alert
volume setting, keypad alarm disable, and interior zone delay
5 programmable system times:
- entry delay (1 & 2), exit delay, burglary alarm cut-off time, and
fire alarm cut-off time
distributed control architecture
- controller and communicator can be securely isolated
alarm history
- system retains a record of sensors that went into alarm during past
armed periods
- alarm history can be viewed from keypad or remote DSC-DLS
programming software
upload/download capability
- program system from remote computer via DSC DLS software
- view status, trouble conditions, and alarm history
- flexible downloading options : answering machine override, ring
detect answering, downloading call-back, user initiated downloading,
and periodic (automatic) downloading
Fully Supervised
detectors send a supervisory transmission every 12 minutes
The following trouble conditions are displayed on all keypads by
device and type, and can also be transmitted to a monitoring station:
AC failure on: controller, sounder 1, sounder 2
low battery, tamper, device fault on:
- sounder 1 - sounder 2
- keypad 1 - keypad 2
- controller - individual zone detectors
telephone line trouble
failure to communicate
RF jam detect
loss of clock
Flexible Communications
industry standard communications formats:
- Silent Knight / Ademco Slow 10BPS
- Sescoa, Franklin, DCI, Vertex 20BPS
- Radionics 40BPS with or without parity
- 1400 or 2300Hz handshake as required by above formats
2 phone numbers
1 account number
False Alarm Prevention Features
Fully programmable features to prevent false alarms and unnecessary
transmissions to the monitoring station include:
- audible entry/exit delay
- audible exit fault
- swinger shut down
- interior zone with delay
- opening after alarm code
- auto-interior bypass
- fire safety transmission delay
- fire safety transmission delay
- AC failure & zone low battery transmission delays
The controller contains the system's main electronic components:
the alarm control panel, digital communicator with built-in telephone
jack connections, and Spread Spectrum radio circuitry.
may be located in a secure area, thereby protecting its
ability to communicate with the Central Station without
being interrupted
fully supervised for:
- low battery
- AC failure
power requirement:
- 12V ac adapter (supplied)
- 6V 1.2Ah sealed battery (supplied)
dimensions:
- 8.82"W x 5.24"H x 1.77"D
- (22.4 x 13.3 x 4.5cm
The Marquis system is fully programmable from the back-lit, easy
to use, English or French language WLS902 keypad:
900MHz Spread Spectrum wireless operation
full 2-way communications… to and from the controller
up to 2 keypads per system
large 32 character display of:
large 32 character display of:
- zone identification
- system instructions
- system status
- alarm history
- trouble conditions
plain language operating instructions
- menu for programming and user functions
- which key to press for specific functions
- steps for programming functions
3 dedicated 'One-Touch' alarm keys:
- [F]ire, [A]uxiliary, [P]anic
backlit display
- display and keys backlit for easy viewing in low light conditions
- adjustable display contrast
keypad inactive state
- when inactive, keypad screen goes blank to conserve batteries
- simply press any key to wake-up display
fully supervised by controller for:
- tamper
- low battery
- device fault
power requirement:
- 4 AA alkaline batteries (supplied)
operating temperature:
32° to 122°F (0° to 50°C
dimensions:
7.68"W x 5.24"H x 1.06"D
(19.5 x 13.3 x 2.7cm)
The siren/repeater functions as the Marquis system's alarm siren and audible
annunciator for features such as door chime and walk test. Further, the first
siren/repeater in the system functions as a redundant RF communications path
providing 'True Diversity' to ensure that signals from the system's components
reach the controller:
900MHz Spread Spectrum wireless operation
up to 2 siren/repeaters per system :
93dB high output piezo siren - volume adjustable
door chime
transistor output switch to activate remote siren
- activates a 30watt self-contained battery backed-up siren available from DSC
- activates on alarm and system test tones
- remote siren operates only when AC power is available unless additional
battery backup is provided
fully supervised by controller for:
- tamper - low battery
- device fault - AC failure
power requirement:
12V ac adapter (supplied)
6V 1.2Ah sealed battery (supplied)
operating temperature:
32° to 122°F
(0° to 50°C)
dimensions:
7.17"W x 4.41"H x 1.69"D
(18.2 x 11.2 x 4.3cm)
4 interchangeable lenses & detection areas:
- wall-to-wall...50'L x 60'W (15.2x18.3m)
- corridor...120'L x 10.5'W (36.6x3.2m)
- curtain...50'L x 4.4'W (15.2x1.3m)
- pet alley...50'L x 60'W (15.2x18.3m)
high traffic shutdown mode
- prolongs battery life by automatically stopping reports to the system controller
if the detector is activated more than once in a 3 minute period. Detector resumes
normal transmissions to the controller after a 3 minute period of no activity
fully supervised by controller for:
- tamper
- low battery
- device fault
wall, corner, or ceiling mounting
optional adjustable wall and ceiling mount brackets
- adjustable up/down tilt and 90° rotation to obtain ideal position for optimal coverage
power requirement:
4 AA alkaline batteries (supplied)
may be used as a self contained magnetic door or window contact or as a terminal connection
for an external device.
2 internal reed-switch contacts
- accommodates different mounting requirements when used as a self contained door
or window contact
fully supervised by controller for:
- tamper - low battery
- device fault - open/close
power requirement:
3 AAA alkaline batteries (supplied)
UL/ULC Listed
exclusive (patented) smoke chamber design provides:
- maximum smoke detection
- exceptional resistance to dust, insects and air turbulence thereby lowering
false alarms
90° smoke detection pattern
RED solid-state LED indicator light
loud 85dB piezoelectric alarm horn
automatic self-test once every 40 seconds with visible and audible
trouble indication for low smoke sensitivity and low battery
manual user sensitivity test button with local indication of test result
installer's test mode allows test locally or by transmission to
Central Station
fully supervised by controller for:
- tamper - low battery
- device fault - low sensitivity
tampered to ceiling for protection against unauthorized removal
power requirement:
6 AA alkaline batteries (supplied)
may be used as a self contained magnetic door or window contact
complete with surface mount magnet
fully supervised by controller for:
- tamper - low battery
- device fault - open/close
power requirement:
1 lithium battery (supplied)
flush-mount transmitter for concealed door and window
contact applications
complete with flush mount magnet
fully supervised by controller for:
- tamper - low battery
- device fault - open/close
power requirement:
1 lithium battery (supplied)
two independent dual-element low noise sensors
detection area:
40'L x 50'W
(12.2 x 15.2m)
patented multi-level PIR signal processing
high traffic shutdown mode
prolongs battery life by automatically stopping reports to the system controller if
the detector is activated more than once in a 3 minute period. Detector resumes
normal transmissions to the controller after a 3 minute period of no activity.
fully supervised by controller for:
- tamper
- low battery
- device fault
standard corner or wall mount
optional adjustable wall and ceiling mount brackets
- adjustable up/down tilt and 90° rotation to obtain ideal position for optimal
coverage
power requirement:
4 AA alkaline batteries (supplied)
detection of all common types of framed glass including plate, wired,
tempered, and laminated
detector also accommodates different types of frame construction,
glass thickness, and room acoustics
detection range:
up to 25ft. (7.6m)
fully supervised for:
- tamper
- low battery
- device fault
internal sensitivity selection switch
power requirement:
3 AA alkaline batteries (supplied)
AFT-100 Glass Break Simulator ensures reliable installation
and response
'True Diversity' RF communications
- each transmitter has two paths to the controller
Path 1: directly to the controller
Path 2: to the sounder which relays the signal to the controller
- only one path has to be open to complete a transmission
module placement test mode
allows installer to carry a keypad to the proposed locations for system
modules (siren-repeaters, keypads, detectors) and test communications
to the controller before the module is installed. Keypad reports whether proposed
location is "good", "fair" or "bad".
walk test mode
- allows installer or user to independently test the operation of each detection device
without setting off an alarm)
sounder test mode - tests sounder operation
manual dialer test mode
- tests dialer communication to monitoring station
Product Lines - Top Of Page
